Now we are venturing in to the market with internationally acclaimed products
in the name of Reyad Goodwood. Thus we aim contributing positively to growing global
demand and the present economy trend. We set our products and service standards
high considering value for money and time.
The products are manufactured using technologies to acquire maximum yield from the available recourse and thus reduces the dependence on our planets cut the ecological bank. Our product line includes
Finger jointed Laminated Beams
Rough sawn chemical impregnated and kiln dried timber is docked to components with a 10mm over cut in length and machined to the specification and passes through trim saw and then has the fingers cut into the timbers with specifically designed cutter/knives. The shook’s then have a special glue spread onto the surface tips and into the bottom of the fingers and then each shook’s is pressed together to the length requested by the clients and then laminate each length of strips side by side in rotary clamp cold press to the particular width as per specification and finally passes to the sanders for sanding to specified thickness.
Available product
RUBBER WOOD FINGER JOINTED LAMINATED BEAMS
Rubber wood glued blocks, which is proper for wood construction, furniture processing and other various applications.
Beech glued blocks, which is proper for wood construction, furniture processing and other various applications.
Drying: Kiln drying: 8-12%
Glue: F4
Grade : AA, AAAA
Popular sizes:
60x60mm, 70x70mm, 80x80mm, 90x90mm, 100x100mm, 120x120mm, 150x150mm.
Lengths: DC can tailor her products to meet all requirements
Rough sawn chemical impregnated and kiln dried timber is docked to components with a 10mm over cut in length and machined to the specification and passes through trim saw and then has the fingers cut into the timbers with specifically designed cutter/knives. The shook’s then have a special glue spread onto the surface tips and into the bottom of the fingers and then each shook’s is pressed together to the length requested by the clients and then laminate each length of strips side by side in rotary clamp cold press to the particular width as per specification and finally passes to the sanders for sanding to specified thickness.
Available product
RUBBER WOOD FINGER JOINT LAMINATED PANELS
GRADE AA
Our highest quality grade which is ideally suited for uses where both clear faces are required. It is free of all defects and has color uniform. Small live knots are allowed. Due to its clean appearance, AA grade F.J.L boards require minimum processing to achieve an excellent finish.
GRADE AB
One side is A grade, another side is B grade which allows live knots and small black knotes with diameter less than 5mm. Short black lines and average 5-9 defects in one square meter are allowed. This unique grade is ideally suited for the manufacture of all kinds of furniture such as table tops, cabinet doors, counter boards.
GRADE AC
One side is A grade, another side is C grade which allows live, black knots, and black lines with no restriction on the amount, quality is lower than above grades, mainly use for flooring.
RADIATA PINE FINGER JOINT LAMINATED & EDGE GLUED PANELS
Radiata pine laminated panels are welcomed by buyers both locally and overseas for its diversity and multiple use. These products are renowned for their high quality and suited for the manufacture of all kinds of furniture.
Drying:
Kiln drying: 8-12%
Glue: F4
Grade : AA
Popular thicknesses:
18mm, 20mm, 24mm, 30mm.
Widths and lengths: DC can tailor her products to meet all requirements.
BEECH FINGER JOINT LAMINATED PANELS
Beech laminated panels are welcomed by buyers both locally and overseas for its diversity and multiple use. These products are renowned for their high quality and suited for the manufacture of all kinds of furniture.
Drying:
Kiln drying: 8-12%
Glue: F4
Grade : AA , AB, AC, BC
Popular thicknesses:
18mm, 20mm, 24mm,30mm
Widths and lengths: DC can tailor her products to meet all requirements.
Please contact us for further information.
Wood which does not shrink under normal condition due to moisture evaporation, Is called seasoned wood. Generally timber with moisture content less than 15% does not appreciably shrink, it can be called as seasoned timber. It is desirable that in carpentry and joinery work, wood does not shrink after it is joined and furnished. But if unseasoned wood is used it will give out moisture further and shrink after work is done. This will obviously weaken the joints and give clearance between the pieces for a bad finish.
When seasoned timber is used, the joint remain intact and no gap develops between the pieces of timber after finishing. Hence for making door and window shutter’s, furniture, interior decoration and such other work where strength and finish matter, the seasoned timber is advisable since use of seasoned timber give longer life and better finish. there is a growing trend to use seasoned timber in wood industries.
